Why People Think Regulators Are A Good Idea

      Comments Off on Why People Think Regulators Are A Good Idea

Factors to Consider when Selecting a Flow Meter An instrument that is used to measure the flow rate of liquids and gases is a flow meter. When buying a flow meter, the familiarity of the working personnel with the device and their experience with calibration is what one should take into consideration. Also one should consider the maintenance factors such as availability of spare parts and the probability of failure. The cost of installation one should also take into consideration. A device because it is less expensive one should not buy since this can be the most costly installations. One can consult an installation engineer when buying the flow meters just in case there are any flow measurement challenges. Evaluating the nature of the process fluid and flow characteristics are the basics to selecting the best flow meters. One should also consider the piping and the area the flow meter is to be located. The pressure, temperature, viscosity, density and many others are the fluid characteristics to be considered. For the flow meter to operate properly these properties should have an indication of how they should interact. A detailed composition of the fluid should also be there. This is to say that one should indicate whether the fluid has solids and whether they are soft or abrasive or whether they have big or small particles. So that one can select the best meter they should know the required meter range and this is done by identifying the minimum and maximum flows that will have to be measured. Over its full range the flow meter’s performance may not be accepted unless one knows the measurement accuracy. The flow meters without moving parts one should choose over the ones with them when purchasing flow meters. A cause of problems and failure are the flow meters with moving parts since they are prone to wear and tear. They also require clearance spaces for the moving parts that sometimes cause slippage into the flow being measured. Different types of flow meters are there and they include; rotameters, piston flow meters, paddlewheel, turbine flow meters, ultrasonic flow meters and magnetic flow meters. Available for in-line and insertion type the magnetic flow meters are. They are ideal for any waste liquids that are conductive. Usually the displays are integral and an analog output can be used or remote monitoring. The ultrasonic flow meters are also used for dirty water or waste water. Employed by the principle of operation is the frequency shift of an ultrasonic signal when it is reflected by discontinuities in the liquid flow. The most used for liquids and gases on the other hand is the rotameter.A Simple Plan: Equipment

Lessons Learned About Meters